Publicité
SOURIS G15IBM1.qxd
All manuals and user guides at all-guides.com
2. Once the installation has finished, click on the Start menu's GyroTools icon to start
up the Gyrotools application.
3.You can assign tools with a double right click, with a prolonged right click or with a
right click followed by a left click.You can assign tools with the scrolling wheel
(example : double click of wheel, prolonged click of wheel, click of wheel followed by
left click).You can assign tools with the three buttons located below the left/right
buttons.There are other ways to activate the tools, such as the clickable areas on the
screen, dragging and programmed events.
4.To assign tools with the help of the Drag and Drop toolbox :
a. Choose the tool group (for example General, Internet or Media) at the
bottom of the Gyrotools window which contains the tool(s) you wish to assign.
b. Left-click on the tool required and keep the button depressed.
c. Drag the tool on to the square icon near the button to which you want to
assign the tool and release the button.
5.To assign tools with the help of the Menu method :
a. Right-click on the square icon located near the button to which you want to
assign the tool.
b. Choose the menu command ''New Tool'' or ''Replace Tool''.
c. Choose the tool group (for example General, Internet or Media) which
includes the tool(s) you want to assign.
d. Choose the required tool from the menu.
e. Once a tool has been assigned to a button, you can define its properties
(colour, border and other parameters).
6. Once a tool has been assigned to a button, you only have to press the sequence of
buttons to request it.
7.When you have finished using a tool, right-click ; the pointer returns to cursor
mode.
23/08/05
18:17
7
Page 7
GB
GB
Publicité
