Publicité
SOURIS G15IBM1.qxd
All manuals and user guides at all-guides.com
5. Start / Stop
Start : Press the Connect button once.
Stop : Press the Connect button and hold down for seven seconds.
Note : it is not necessary to switch the mouse off as it puts itself in standby mode when not in use.
However, when the mouse is being transported, it is preferable to switch it off in order not to drain the
battery.
Note : in the event of functional problems, check that the mouse and the RF receiver are properly
synchronised. If necessary, repeat steps 3 and 4 above.
6. Using the mouse
Using it on the desk
Using it in space
Recommendation : Press the Connect button.The RF receiver blinks to indicate that it is in connection
mode, enabling a device to be synchronised with the receiver. If you do not cancel connection mode
manually, the receiver reverts to Normal mode after 15 seconds. Double-click on the activation trigger to
keep the cursor active. Click once on the trigger to immobilize the cursor.
23/08/05
18:17
Place the mouse on a flat, light surface, avoiding glass
or reflective surfaces.The RF receiver's status
indicator light goes on when it receives the mouse's
commands. Use the mouse like a standard desktop
mouse.
Note :To prolong the battery's useful life, avoid using the mouse
on dark surfaces.
Hold the mouse by placing your index finger on the
activation trigger and your thumb at the base of the
scrolling wheel. Continue to press the trigger while
bending your wrist upwards, downwards and
sideways as you would with a torch.The mouse's
cursor moves on the computer's screen in
accordance with the movements of your hand. It is
not necessary to point the mouse towards the
screen. Press the left or right buttons or use the
wheel with your thumb.
5
Page 5
GB
GB
Publicité
