Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
PHASE 1: ASSEMBLING THE VERMICOMPOSTER
COMPOSITION OF YOUR KIT
SETTING UP THE ECO-WORMS COMPOSTER
1
Turn the collection tub around and position the two O-rings in
their holes. Remove the pin attached to the valve (see accesso-
ries above).
5
Attach the 6 castor wheels to the base.
Fix the 3 studs to the cover – these will be the fastening points
for the Eco-Worms composter (see photo 6).
9
Stack the 3 baskets and position them on the collection tub.
1 COVER WITH
FASTENING STUDS
3 BASKETS
1 SETTLING TRAY
1 COLLECTION TUB
1 MOBILE BASE
2
6
www.garantia.co.uk
ACCESSORIES
3 STUDS
PIN
1 X VALVE/2 JOINTS ASSEMBLY
1 WORMS ORDER FORM
3
Position the valve as shown in photo 3.
Turn the unit around, keeping the valve in position.
Set the pin into the axis of the valve.
7
Fit the base on its 6 wheels to the collection tub.
Turn the unit and position the settling tray.
10
Your Eco-Worms composter is now ready for use.
6 CASTOR
WHEELS
1 X 500 ML WORM TEA
MEASURING CUP
4
8
Publicité
Table des Matières
