Publicité
TROUBLESHOOTING
Problems
Dryer does not start.
Display is not on.
Degree of dryness is not
reached.
If you cannot deal with problems by yourself and need help,
press
to turn off the appliance and unplug it.
Contact the after-sales service.
Error Codes
Display
Cause
Container is full.
Water pump failure or water level sensor failure
E33
Temperature sensor error
E64
BLDC motor communication error
E82
PCB Communication error
Possible Solutions
Check the door has closed properly.
Check the program has set.
Check the start button
Check if the power supply works.
Check if the mains plug is inserted.
Check the program has set.
Check the power button
Clean lint filter and heat exchanger.
Empty container.
Check drain hose.
Dryer installation place is too restricted.
Use higher drying level program.
86
is pressed.
is pressed.
Solution
Empty water container.
Turn off and unplug the
appliance from the mains
socket. Please contact your
local after-sales service if the
error occurs.
Publicité
