Publicité
BEFORE INSTALLING THE APPLIANCE
Before connecting your dryer to the power supply, check that the voltage stated on the rating label of
your appliance corresponds to the voltage in your home. A different voltage could damage the
appliance.
The plug is the only way to unplug the appliance and should therefore be accessible at all times. To turn
off main power to the appliance, turn it off and then detach the plug from the outlet.
The appliance must be grounded. The manufacturer is not responsible for damages that may occur as a
result of usage without grounding.
INSTALLATION
- It is recommended that, for your convenience, the appliance is positioned close to your washing
machine.
- The appliance must be installed in a clean place, where dirt does not build up.
- The appliance should not be located near a gas hob, cooker, heater or grill, as flames from the burners
could damage it.
- When installing the appliance, make sure that the power cord is not trapped or twisted.
- Do not install the tumble dryer in a room where there is a risk of frost occurring. At temperatures
around freezing point the tumble dryer may not be able to operate properly. There is a risk of damage
if the condensed water is allowed to freeze in the pump and hoses. The tumble dryer works best in
the ambient temperature between 5°C and 35°C.
- To keep vibration and noise to a minimum when the dryer is in use, it should be placed on a firm, level
surface.
76
Publicité
