Publicité
If the dryer is installed below a worktop, ensure that there are at least 20 mm between the upper panel
of the dryer and any objects above it, and at least 15 mm between the sides of the dryer and furniture
units adjacent to it, and at least 30 mm between the rear of the dryer and the walls or furniture units
adjacent to it.
Levelling the appliance
The dryer must be perfectly level to ensure safe and proper operation.
If the dryer is not properly level, adjust the levelling feet as necessary.
DO NOT insert pieces of wood of any other object under the feet.
If the appliance is installed on a carpeted floor, please adjust the feet in order to allow air to
circulate freely under the appliance.
Do not remove the feet. Do not decrease the floor clearance through thick carpets, pieces of
wood or equivalent. This can increase the heat which can affect the operation of the appliance.
Level the appliance by raising or lowering the feet.
Never put cartons, wooden blocks or similar materials under the
machine to balance the irregularities on the level of the ground.
Accurate levelling prevents vibration, noise and displacement of the
appliance during operation.
Installing accessories
If you dryer has following parts, please wear gloves and install them as per the instruction below.
595 mm
Hose holder
Drain hose
Connector
77
680 mm
655 mm
845 mm
Publicité
