Publicité
Draining the Water Container
If you forget to drain the water container, the appliance will stop during drying when the water
container is full and the warning indicator light
container and press
Cleaning the Heat Exchanger
1. Open the outer maintenance cover.
2. Unlock the 3 locks. Pull out the inner cover.
3. Clean the inner cover under running water. Dry thoroughly.
4. Clean the heat exchanger once every 3 months.
5. Place the inner cover back into position. Fasten the 3 locks and make sure that they are secured.
6. Close the outer cover until a click is heard.
Drain the water container after each drying process. To drain the
water container:
1. Pull the water container and remove it carefully.
2. Drain the water in the container.
3. Place the water container back into position.
Condensed water is not drinkable!
Never remove the water container when the appliance is
operating!
to resume the drying cycle.
Do not touch the heat exchanger with your hand!
Remove the fluff from the heat exchanger using a vacuum cleaner with a
dusting brush attached. Clean the heat exchanger without applying any
pressure.
will illuminate. In this case, drain the water
85
Publicité
