Publicité
4. Replace the axis on the Hinge 1 and tighten it firmly. Remove Hinge 1 and place it
on the opposite bottom side.
5. Remove Hinge 2 and place it on the opposite top side. Separate the axis from
Hinge 2 and set it aside.
6. Align the door on Bottom Hinge 1 and replace axis on Hinge 2. Tighten it firmly.
Place the handle on the side of the door away from the hinge side.
7. Push the plug buttons into the original screw holes.
8. Swap the door handle.
See Figure below.
Electrical Connection
Important! For your personal safety, this appliance must be properly grounded. In the
event of an electrical short circuit, grounding reduces the risk of shock by providing an
escape wire for the electric current. This appliance is equipped with a cord having a
grounding wire with a grounding plug. The plug must be inserted into an outlet that is
properly grounded and installed. The ground wire cannot be connected to a gas pipe,
heating pipe, water pipe, telephone line or lightning rod. It cannot be replaced with
the neutral wire of single-phase power. In addition to the ground wire, an electrical
leakage circuit breaker is also required. Consult a qualified electrician if you do not
7
Publicité
