Publicité
6. Press the on/off key on the panel (8), the pilot light of ON/OFF KEY will light on and the key lock (F) is
activated. The coffee will start to be released from the tube (13) after a few minutes, and will be kept
warm for 30 minutes. When the pitcher (2) is full, mix the coffee before serving.
Note: before using the coffee maker for the first time, all the accessories and the internal circuits should be
washed with hot water. Then make a few batches of coffee to throw away.
CLOCK SETTING
- Press key "CLOCK" (A) until the current time is reached. Keep pressed to go on quickly.
TIMER SETTING
Set the current hour as described in previous chapter. Press key "TIMER" (B) Until is reached the hour in
which you want to prepare coffee. Keep pressed to go on quickly.
PROGRAMMING COFFEE PREPARATION
After having set the current hour and the timer, follow the steps from 1 to 7 in the chapter "OPERATING
THE UNIT". Then press the key TIMER ON (D) on panel (8). The TIMER ON pilot light will switch on and
the key lock (F) will activate. At the hour set with the timer, appliance switches on, the TIMER ON pilot light
switches off and the one of ON/OFF key goes on.
Coffee will start to be released from the tube (13) after a few minutes and will be kept warm for 30 minutes.
If you want to make coffee at the same hour already set in the timer, you just have to press TIMER ON
(D) key and put the coffee maker on the base.
KEY LOCK
When pressing TIMER ON (D) and ON/OFF (E) keys, the key lock
function activates automatically, and all keys are disabled. To deactivate that function,
press the KEY LOCK (F) for 3 seconds, until the KEY LOCK pilot light switches off.
MEMORY
If you unplug the unit, the clock stops, and the timer setting is lost. To keep the settings, the
product ha sto stay always linked to power supply, or you have to insert a 3V battery, model CR2031, In the
battery case under the base. To do this:
-
With a screwdriver or a coin rotate anticlockwise the battery case cover
-
Insert CR2031 battery, with + mark side in upper direction
-
Mount the lid with the screwdriver or the coin.
CLEANING -
Unplug the unit and wait until the complete cooling down of each
part before starting cleaning operations.
Periodically clean the tube (13) and check that the holes in the disk filter (4) are not blocked;
wipe it off with the help of the head of a pin. Periodically check the condition of the funnel
(11) and the gasket (5): if you find any signs of tear, you should replace them.
Do not wash the coffee maker in the dishwasher. Do not rinse the boiler. Do not immerse the electric base in
water or other liquids and avoid splashing of water reaching the unit. In this case, carefully wipe any part of
the appliance. Do not use solvents or abrasive cleaners to clean the unit, wipe with a soft damp sponge
making sure not to wet the electrical parts. Drinking water can cause scale deposit in the valve hole (10). The
valve can therefore be stuck, resulting in malfunction and also the unsafety of appliance. To avoid this
inconvenience, during normal cleaning operations, just move the piston that comes out of the safety valve
(10). This will keep the valve efficient, will guarantee safety and will also improve operation of the device.
TECHNICAL FEATURES
•
Power supply: AC 230V ~ 50-60 Hz. Power 400W
•
Maximum capacity 3 cups
•
Programmable timer, LED display and electronic control
Connected power supply, LCD CLOCK display default 12:00. To set the clock
To set the coffee preparation at the desired hour.
12
Publicité
