ECOFOREST ECO I Manuel D'installation Et Maintenance page 39

WiFi upper view.
If the stove that you have is an Eco I Insert, you must fix the safety thermostat to the panels of the insert
model. These panels have a hole, through which you must insert the thermostat (
it to the socket with a nut (
showing the final result in the drawing 19.
Drawing 18
5. CLEANING AND MAINTENANCE.
To ensure the correct operation of your stove, the following cleaning and maintenance operations are
necessary at the indicated frequency. The stove must always be cold.
The deterioration of the stove parts by a lack of cleaning involves the loss of the two-year warranty offered
by ECOFOREST (see warranty section).
5.1.
Heat Exchanger. (Except Eco mini model)
Pull the drawers of the rake-this shall be done while the glass door closed in order to reach the ash inside the
stove. This shall be done every day when the stove is cold.
For Ecoaire model (drawing 20) and Ecoaire Insert, you can Access to the drawers of the rake opening the
trim grill.
q
Trim grill.
w
Drawers of the rake.
ASSEMBLING OF THE SAFETY THERMOSTAT IN INSERT MODELS.
w ) and finally you screw the stopper (q). The stove used in drawings is an EcoII model,
DAILY CLEANING WHEN THE STOVE IS COLD.
WiFi plan view with no metal objects around.
e
38
) according to drawing 18, and fix
Drawing 19
Drawing 20