Publicité
LCD Diagram
1. Battery Level.
2. Output wattage (W) or input voltage display (VDC).
3. Warning indicator –
a. High voltage
b. Low voltage
c. Voltage overload.
4. Temperature shutdown.
Hardwire Instructions KR3000 / KR4000
First make sure unit is completely disconnected from any power source
and main power is completely OFF. Begin by unscrewing the front plate
which is located under the 2 x AC outlets at the front of the inverter.
You will then see the 3 connecting terminals, as illustrated below:
H: HOT
N: NEUTRAL
E: EARTH (GROUND)
Publicité
