Publicité
Note:
The type of batteries you use to power your high power inverter is
important. Operating a high-power inverter will routinely discharge
batteries and they will require frequent recharging. Batteries used to start
engines are not designed to repeatedly charge and discharge. Kriëger
recommends using "deep-cycle" or "marine" rated batteries.
Cable Gauges
When connecting the inverter to a battery bank use the thickest stranded
insulated copper wire available, in the shortest length practical.
Recommended cable gauges are as follows:
Model #
KR1100
KR1500
KR2000
KR3000
KR4000
WARNING:
DANGER OF BATTERY EXPLOSION – INSTALL A FUSE
Battery banks can deliver very high levels of current that can vaporize
metal, start fires and cause explosions. Kriëger
one ANL type fuse and fuse holder close to the positive battery bank
terminal. This fuse protects the batteries from accidental DC cable shorts,
which can cause batteries to explode. ANL fuses and fuse holders are
available at most marine supply stores.
Recommended Gauges
4AWG (3 ft. included W/ 110A inline ANL Fuse)
2AWG (3 ft. included W/ 150A inline ANL Fuse)
2AWG (3 ft. included W/ 200A inline ANL Fuse)
0AWG (3 ft. included W/ 300A inline ANL Fuse)
0AWG (3 ft. included W/ 400A inline ANL Fuse)
®
recommends installing
®
Publicité
