Publicité
EXPLANATION OF SIGNS
Accordance with the requirements of UK standards
The product is for indoor use only
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To
prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to
promote the sustainable reuse of material resources. To return your used device, please use the return and collection
systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recy-
cling.
SAFETY RECOMMENDATIONS
• Please read the instructions carefully and keep them for later reference.
• The unit is for indoor use only in a dry location.
• In the event of serious operating problem, stop using the unit immediately.
To avoid hearing loss, do not expose yourself to high volume levels for long periods of time.
• The device complies with current European legislation regarding human exposure to electromagnetic fields.
• Caution: Flashing lights can cause epileptic seizures in sensitive people.
• Unplug the charger when the battery is fully charged. Avoid charging the product at night or when you are
away.
• Not suitable for children below 14.
CHARGING THE BUILT-IN BATTERY'
Prior to using the speaker for the first time, fully charge the built-in battery via the supplied USB lead (type-C
connector). The charging voltage and current are 5V 1A.
IMPORTANT NOTE FOR APPLIANCES CONTAINING LITHIUM-ION BATTERIES
1. PRIOR to using the unit for the first time, please charge fully the battery
2. Charge the battery regularly after each use. Don't wait until it is discharged!
3. DON'T allow the battery to discharge completely, otherwise it will lose 20% of its capacity or even be
totally damaged! If the voltage becomes too low, the internal circuits are not powered anymore and it will
become impossible to recharge the battery!
4. If you don't use the unit for a longer period of time, it is recommended to charge it at 40% of its capacity
and check/charge it once per month.
The lifetime of the battery depends on the observance of these recommendations.
We cannot be held responsible for damaged batteries further to the non-observance of these basic rules.
TOP PANEL CONTROLS
1. Microphone input via 6.35mm jack
2. Power on/off switch
3. TF (micro SD) card
4. (skip backwards) button
5. ▶ (play/pause) button
6. (skip forward) button
7. M button: long press for LED light control, short press for Mode selection
8. Red LED indicator
9. USB-C charging & AUX port
10. USB playing port
11. Volume control
BLUETOOTH CONNECTION
Turn the speaker on. Activate the Bluetooth function on your mobile phone, search for TEEN-VIBE and connect.
When you switch on the speaker next time, it will automatically connect to the last paired Bluetooth device.
TWS PAIRING WITH ANOTHER TEEN-VIBE
Both speakers must be in BLUETOOTH mode. Turn on both speakers at the same time. Both speakers must have
the same Bluetooth name. Double-click the PLAY/PAUSE button on one of the speakers. If you hear a tone, the
speakers have connected successfully.Now, activate the Bluetooth search function on your smartphone and
select TEEN-VIBE in the list of found devices. If the connection was successful, you will hear a tone.
INSTRUCTION MANUAL
** BATTERIES ARE NOT COVERED BY THE WARRANTY **
©Copyright LOTRONIC 2024
3
Publicité
