Publicité
2. Installation
2.1 Filter element assembly and body parts assembly
Assemble the body parts in the direction of the arrow(s).
1.
1.
2.2 Assembly of suction
head
Insert the entire suction
head directly
into the Cover the canister
3. Power On
3.1
Press and hold the power button down on the cleaner for 2-3
seconds. When the "green"indicator light remains on, the
cleaner is on. Place the cleaner into the water for operation
and begin cleaning. DO NOT keep the cleaner on when out
of water. At this time, the cleaner is in low-speed mode.
When the switch button is pressed again, the cleaner shuts
3.2
down.
2.
2.
2.3 Handle assembly
(1) Handle assembly
This handle is used to clean
floors, steps, sun decks and
corners, as shown in figure "A"
Note: this product can be used with a handle (A) or a
standard telescopic pole (B) (telescopic pole B is optional
and needs to be purchased separately).
3.
3.
"CLOSE"
(2) Assembly of telescopic pole
(not included)
Cleaner can be connected to a
standard telescopic pole, as
shown in figure "B".
A
3
4.
4.
B
ON/OFF
Publicité
