Establishing Radio Communication - Intermatic Grasslin thermio essential H Brf Mode D'emploi

Establishing radio communication

Personal:
• User
Setting the room code on the room thermostat (transmitter)
1. Press the radio communication button (Fig. 1/11) on the device.
"00 H" flashes on the display (Fig. 1/5).
ð
2. Press the top button (Fig. 1/4) to increase the value or the bottom button (Fig. 1/7) to decrease the
value.
3. Press the radio communication button (Fig. 1/11) to save the house code and switch to the next
display.
"01 r" flashes on the display (Fig. 11/5).
ð
62
The house code must remain unchanged or it will not be possible
to establish a connection to the actuator (receiver).