Room Thermostat (Transmitter); Installation In A Flush-Mounted Socket - Intermatic Grasslin thermio essential H Brf Mode D'emploi

Room thermostat (transmitter)

INSTALLATION IN A FLUSH-MOUNTED SOCKET

Personal:
• Qualified electrician
Installing the mounting plate
1. Attach the mounting plate to the flush-mounted socket with screws (3.5 x 25 mm) (Fig. 5).
Removing the housing cover
2. Undo the screw on the device housing with the Phillips screwdriver and remove the housing cover.
48
The arrow (Fig. 5/1) on the mounting plate should point upwards.