CLAS OH 5306 Mode D'emploi page 7

OH 5306

2. Lowering: Opening release valve by slowly turning release knob counterclockwise (never more than 1/2 full

turn of the handle) (please see illustration "F"). Only until the saddle reaches its lowest position, then move the jack

out of the vehicle.

MAINTENANCE

1. Keep the jack clean and apply lubricating oil to all pivoting sections every three months.

2. Frequently check oil level (please refer to "Instructions Before Use").

3. Check pump piston and piston rod periodically for signs of rust or corrosion. Clean exposed area with a clean

oiled cloth.

All manuals and user guides at all-guides.com

SERVICE GARAGE JACK 2.25T

clas-equipements.com