Publicité
small ringlets
1
Connect the twisted curling attachment to the handle.
Take a lock of hair, press the lever to open the clip and place the
lock between the barrel and the clip (Fig. 6).
Note: Make sure that you wind the end of the lock in the required direction.
Open the clip after 5 to 10 seconds and remove the barrel from
the hair.
Let the ringlets cool down before you comb, brush or finger-comb
the hair into its final style.
oval curls
1
Connect the oval attachment to the handle. (Fig. 6)
Take a lock of hair, press the lever to open the clip and place the
lock between the barrel and the clip.
Note: Make sure that you wind the end of the lock in the required direction.
Open the clip after 5 to 10 seconds and remove the barrel from
the hair.
Let the oval curls cool down before you comb, brush or finger-
comb the hair into its final style.
Flicks
1
Connect the straightening attachment to the handle.
Slide the straightening plates into the attachment with the curved
sides pointing towards each other (Fig. 9).
Take a lock of hair (max. 5 to 6cm wide). Press the lever to open
the straightening attachment and place the lock between the
plates (Fig. 10).
Decide if you want to create inward or outward flicks. Hold the appliance
in such a way that the curved sides of the plates create the desired type
of flick.
All manuals and user guides at all-guides.com
EnglisH
11
Publicité
