Publicité
PROBLEM
Water
shortage
indicator light is on
Indicator
lights
control panel are not on
The ice making process
was correct, but no ice
came out?
All indicator lights flash
at the same time.
The machine has been
working, but the water
has been warming
When the ice is full, the
machine
does
display the ice full icon
POSSIBLE CAUSE
1. There is no water
2.The pump is full of air
on
No power
1. The compressor has no
refrigerant
2. Compressor damaged
3. Fan motor damaged
1. The water box is
blocked by ice.
2. The motor is stuck, or
the motor falls off, or the
motor is damaged
3. Micro switch damaged
Solenoid broke down
1. sensor damaged
not
SUGGESTED SOLUTIONS
1. Add some water until it
reaches MAX position
2. Press START/PAUSE button
to restart the machine
Turn power on
Call the service hotline
1. Take out the ice under the ice
shovel, plug in power again, and
press the POWER button. After 3
minutes, the machine will restart
automatically.
2. Call the service hotline
Call the service hotline
1. Call the service hotline
26
Publicité
