Publicité
immediately, do not let the ice overflow the ice collecting tray.
CLEANING & USE GUIDANCE
1. Clean the inner liner, ice collecting tray, water tank and ice
shovel frequently. When cleaning, unplug the unit and remove
the ice cubes. Use a diluted solution of water and vinegar to
clean the inside and the outside surface of the Ice maker. Rinse
thoroughly before use.
2. Keep ventilation openings in the appliance enclosure, or in the
built-in structure, clear of obstruction. Do not use mechanical
devices or other means to accelerate the defrosting process,
other than those recommended by the manufacturer.
3. Reuse the machine after being idled for a period of time, it may
not be able to pump enough water up for air blockage. In this
case, the water shortage indictor sign is displayed, just repress
START/PAUSE button to restart the ice maker.
4. To ensure the cleanness of ice, please change water for water
reservoir at least once one day. If do not use for a long time,
please drain the water out and clean it up.
5. If the compressor does not work due to lack of water, ice full,
power failure, etc, it will delay for 3 minutes to start up after
restarted.
6. Always use fresh water before starting ice production either at
initial installation or after a long shut-off period.
7. According to the actual use of the machine, the filter screen in
the water tank shall be regularly cleaned after disassembly to
prevent the water inlet from being blocked by scale. As shown in
the figure below.
Take out the ice collecting tray, filter cover from the water tank in
turn, clean the filter cover with clean water with a brush, and then
24
Publicité
