Publicité
put them back in place.
TROUBLESHOOTING
Please note, if a power failure occurs due to disconnection of the
1.
power cord, or the power button has been pushed off during an ice
making cycle, small ice chips may formed and lodge in the
automatic shovel causing it to jam. If this occurs, the ice chips may
be removed by disconnecting the power cord and gently pushing
the shovel to the rear of the cabinet and removing the ice chips,
then restarting.
Please check if the water reservoir is flat when the ice shovel can
2.
not remove the ice to ice collecting tray. If not, please push the ice
shovel gently by finger, then press START/PAUSE button to
restart.
Ice collecting tray
Filter cover
25
Publicité
