D. Operation
1. Switch on the handset by a long press (3 seconds) of the red power ON/OFF button
Note: Long press the same button again in case you want to switch off the handset.
2. The LCD screen will show up. In case the self battery low icon
is critical and needs to be recharged by placing the unit into the charging cradle. To protect battery, if the unit is
not recharged when the icon
segments inside the battery level icon
3. To select the different methods of incoming call alerts on the handset, press and hold the volume Up/Down
⑯
⑰
buttons
&
⑰
button
to choose one of the seven alert methods (see
to confirm your selection and return to normal operation mode.
Note that if you select a combination with vibrating alert, the battery will run down faster.
4. During conversation, the sound volume heard through the speaker
⑰
the speaker volume icon
5. The chime (ringtone) volume heard can also be adjusted using buttons
Q
chime volume icon
6. Make sure there is a power supply to the caller unit (either by 12-24VDC or alkaline batteries). Now press the Call
①
button
, a ding-dong tone will be heard and the Call indicator
the call, the ding-dong tone will be heard periodically (unless the chime is switched off, see further down),
reminding the visitor to keep waiting. In case there is no answer after 20 seconds, the caller unit ends the call by
itself and the Call indicator
N.B. In case there are two caller units (front gate F and back gate B), only the unit whose call button
pressed will send out a call signal to handset, the remaining unit will keep in standby mode until the conversation
is over. If the call button
④
indicator
flashes twice, indicating the unit is busy.
O
shows up, it will switch off automatically after 10 minutes. During charging, the
P
will flash in turn.
simultaneously for 2 sec to enter the selection mode. Use the volume Up
Q
will change accordingly.
will change accordingly.
④
goes off. Press the Call button
①
is pressed during this period, two "Be-Be" sound will be heard and the call
O
appears and a buzzer heard, the battery level
F
L
to
), shortly press the red hang up button
⑲
can be adjusted using buttons
⑯
④
starts flashing. Until a handset answers
①
to initiate the call again.
7
⑫
.
⑯
or Down
⑯
⑰
&
outside of a call, the
①
⑫
&
is first