Publicité
IMPORTANT SAFETY INSTRUCTIONS
your tool repaired before using it.
16. DISCONNNECT THE PLUG FROM POWER BEFORE MAKING ANY
ADJUSTMENTS. Changing attachments or accessories can be dangerous if the
tool should accidentally start.
17. STAY ALERT. Watch what you are doing & use common sense. Do not operate
any tool when you are tired.
18. CHECK FOR DAMAGED PARTS. Before using this tool, any part that is
damaged should be carefully checked to determine that it will operate properly
and perform its intended function. Check for alignment of moving parts, binding
of moving parts, breakage of parts, mountings, and other conditions that may
affect its operation. Inspect screws and tighten any that are loose. Any
part that is damaged should be properly repaired or replaced by an authorized
service center unless otherwise indicated elsewhere in the instruction manual.
Have defective switches replaced by an authorized service center. Do not use
the tool if switch does not turn it on and off properly.
19. REPLACEMENT PARTS. When servicing, use only identical replacement parts.
20. SERVICE AND REPAIRS should be made by qualified repair technicians at an
authorized repair centre. Improperly repaired tools could cause serious shock or
injury.
SPECIFIC SAFETY INSTRUCTIONS FOR CLG180
1. Do not use this electric lawnmower in the rain or mow grass that is wet.
2. This electric lawnmower is classified as a major appliance and therefore should
not be operated on the same circuit as other major household appliances.
. Keep extension cords clear of the path of the lawnmower. Not doing so could
cause damage to the cord as well as the tool.
4. Remove the power cord from the outlet before doing any maintenance such as
cleaning the blades.
5. Before making any adjustments to the blade, ensure that the tool is unplugged
and the blade has come to a complete stop.
6. Before using the lawnmower, inspect the area that you are going to be mowing
and remove all stones, sticks, wires, or anything else that could interfere with
the operation of the lawnmower.
7. Do not set the height for more than is required for the job you are doing. If the
rotation of the blade slows, pull the lawnmower back slightly and wait for the
blade to return to full speed before proceeding.
8. Only use extension cords that are marked "W-A" or "W" meaning that they are
made for outdoor use. Follow the table under #9 in the IMPORTANT SAFETY
INSTRUCTIONS section when choosing a gauge for the length of cord you
need.
9. Do not remove or alter the guards in any way. Doing so could cause injury to the
operator and/or bystanders.
10. Due to the high speed rotation of the blade, stones, and other objects can be
thrown in directions at a high speed. For this reason, please adhere to the
following:
-Always wear safety glasses, gloves, long pants, and proper footwear. NEVER
operate this tool barefoot or while wearing open sandals.
-Make sure that bystanders, children, and pets are a minimum of 5 metres away
during operation. If someone approaches, turn the tool off.
11. NEVER do anything to manually slow the speed of the blade after the machine
is turned off. Let the blade come to rest naturally.
12. Periodically check the locking knobs, blade bolt, and screws to ensure they are
tight and the lawnmower is in a safe working condition.
13. Always visually inspect the blade, blade bolts, and cutter assembly prior to
use. If any of those pieces are worn or damaged, have them replaced. Always
replace bolts in sets to preserve balance.
14. Use this lawnmower only in daylight.
15. When mowing on slopes, ensure proper footing. Mow across the face of the
slope, never up or down. Use caution when changing direction on a slope.
Never mow excessively steep slopes.
Publicité
