Publicité
4.2. Check the camera status and configure Wi-Fi network
Follow the instructions to determine if the LED lights located on the front of the
camera are flashing alternately in red and blue.
If the indicator lights are flashing alternately in red and blue:
‒
Click on "To connect" to proceed with the connection.
‒
Select your Wi-Fi network.
‒
Enter your Wi-Fi password.
‒
Click on "Next".
‒
Wait for the camera to connect to the Wi-Fi network (approximately
20 seconds).
FGIMPGUI371 – Guide d'utilisation CAM1073 – Indice A – Août 2024 – 30/92
Blue and red indicator lights
When the device is connected and waiting for the
network configuration, the indicator lights flash
alternately in red and blue.
If the indicator lights do not flash alternately in red
and blue, please check the camera is powered on.
Publicité
