Publicité
3.2. Battery charge
3.3. Memory card
FGIMPGUI371 – Guide d'utilisation CAM1073 – Indice A – Août 2024 – 27/92
For optimal use from the first usage, charge
the camera battery for 10 hours before use.
Refer to the diagram below illustrating the
wiring to be done for charging.
Open the small hatch located at the back of the
camera by unscrewing the 2 screws then insert
the memory card following the diagram below.
Before replacing the hatch, check the presence
of the seal in its groove.
Micro-SD card
Max 128 GB
Class 10 minimum
Publicité
