Before you connect Bob to the power supply, please make sure that the voltage on the
type plate corresponds to the voltage of your power supply.
The appliance must be placed on an even and stable surface. Daan Tech is not liable for
any damage caused by placing the device on an uneven and/or unstable surface during use.
3 | G
ETTING STARTED
2 O
Use the water inlet pipe (available on our website). The water tank is automatically
fi lled before each cycle, so there is no need to fi ll it manually. It is the preferred choice
if you use Bob as a built-in dishwasher or if you have close access to a water supply.
Use the built-in water tank: convenient, because it makes Bob completely
autonomous to use wherever you are. Fill the built-in water tank with Bob Carafe
(available on our website). This is the preferred choice if you intend to regularly move
Bob around or if you do not have access to a water inlet.
4 | C
APACITIVE DOOR OPENING
When you touch the door, it automatically opens.
To avoid problems, the capacitive door opening is
deactivated for 3 seconds after closing the door.
When Bob is disconnected from the power supply
you can still open the door but you will encounter
greater resistance due to the deactivation of the
door's capacitive opening system.
Do not plug or unplug by pulling the cord, but always
pull the plug directly.
:
The capacitive area is here
Convenient, because you can open the door
of your Bob with your elbow, for instance, if
your hands are dirty!
5