Publicité
Adding extra items during an ongoing cycle
y
Press the central button
y
Open the door and pay attention to the escaping hot steam
y
Place the additional item in the basket
y
Close the door
y
YES
Select
to continue the cycle
Warning: If you want to cancel a cycle or add additional items, you must press the central
button to interrupt the program.
When the timer is close to zero, the "Drying in progress" icon is displayed.
Please note that some water
residue may remain on your
dishes if you do not wait for the
drying to fi nish.
When the program is completed, a signal sound occurs and Bob will automatically go into standby
mode.
Upon completion of the program, leave Bob's door open (10°) to prevent unpleasant smell. This also
reduces the energy consumption in the standby mode.
14
to pause the current cycle.
At the end of the wash cycle
At this point, the door opens automatically and remains half-open with a 10
degree angle.
Warning Please note that hot steam is released when door opens
Depending on the program, drying might take several minutes and will not
consume additional energy. The program is not completed yet; please wait
a few minutes for the drying to fi nish before removing your dishes.
Warning Please note that some items are very hot and could cause
skin burns if removed too soon. Daan Tech shall not be responsible
for such incidents, which occur when dishes are removed before the
offi cal end of the cycle.
Publicité
