Publicité
2 options for evacutaing the waste water
1
Siphon drain pipe
Connect the water outlet hose to a siphon drain pipe (usually accessible
under the sink)
Warning: The waste water coming out of Bob can reach high
temperature of up to 70°C.
2
Install the water outlet drain hose either in a fi xed or fl exible mode by using the
equipment provided by Daan Tech.
Fixed installation
Place the drain hose directly
in your sink and fi x it with
the equipment provided by
Daan Tech.
Flexible installation
Place the drain hose in a
container (jerrican, bucket,
etc...)
To avoid possible fl ooding, the container shall have a capacity of at least 5L.
2.3 | Power plug
WARNING: Please turn the power supply off before installing Bob.
Connect the power cable to Bob's back.
4
Connect the power cable to a 220- 240V
50Hz plug.
Publicité
