Publicité
Machine
Handle
Drip tray
Faucet
Figure3
Figure 4
2. Install the tap handle connect the tap, make sure both end fit together
perfectly.(Show as Figure 3 )
3. Lift the main machine backward at an angle of 10-15 °, align the drip tray with the
slot at the bottom of the main machine, insert and assemble the drip tray, and then
place the product flat with the desktop (as shown in Figure 4)
4. Plug the device.
Note: Do not connect or disconnect the electric plug when your hands are wet. Before
use it, make sure the voltage is conformity with plug mark, and check whether the
power cord is well connected or not; if not, please don't use it, and call service center;
Heineken Keg
B、
Heineken kegs are pre-charged with CO2, and do not require the use of regulator, no
need to install the CO2 unit.
1. The Heineken connector that comes with your device can work with all
Heineken 5 liter kegs. However you must use a flat head screwdriver to remove the
green base from the keg in order to install the new connector, provided with the
device.
2. Then install the adapter (i.e. Heineken keg mouth) (as shown in Figure 5 and Figure
6) according to the method on the description of the keg (as shown in Figure 8).
18
Publicité
