Télécharger Imprimer la page

Grundig TA 8680 Mode D'emploi page 23

Publicité

INFORMATION ___________________________
Plug Wiring
The moulded plug on this appliance incorporates
a 13 A fuse. Should the fuse need to be replaced
an ASTA approved BS1362 fuse of the same rat-
ing must be used. Do not forget to refit the fuse
cover. In the event of losing the fuse cover, the
plug must not to be used until a replacement fuse
cover has been fitted. Colour of the replacement
fuse cover must be the same colour as that visible
on the pin face of the plug Fuse covers are avai-
labe from any good electrical store.
Fiting a different plug
7
As the colours of the wires in the mains lead
7
of this appliance may not correspond with the
coloured markings identifying the terminals on
your plug, proceed as follows:
Brown cable = L (Live)
7
Blue cable = N (Neutral)
7
Green/yellow cable must be connected to
7
ground (E)
line
With the alternative plugs a 13 A fuse must be
7
fitted either in the plug or adaptore or in the
main fuse box. If in doubt contact a qualified
electrician.
Technical data
Power supply:
220-240 V ~ , 50/60 Hz
Power:
900 W
Technical and design modifications reserved.
For commissioning, general use
and cleaning, please observe
the instructions on pages 4-5 of
this operating manual.
ENGLISH
23

Publicité

loading