Publicité
Display
= Display rotation
Reverse
Display Back-
= Display lighting
light
DMX Fail
= Operational status
with DMX signal fault
Dimmer
= Dimmer curve
Curve
Constant
= Constant brightness
Brightness
when fading from
cold white to warm
white and vice versa
Dimmer
= Dimmer response
Response
Calibration
= Calibration of warm
white and cold white
On
Display is rotated by 180° (e.g. for
overhead installation)
Off
No rotation of the display
On
permanently on
Off
Deactivation after approximately 1
minute of inactivity
Hold
Last command is retained
Blackout
Activates blackout
Full On
Spotlight switches to full on
Stand Alone
Spotlight switches to standalone
mode
Linear
Light intensity increases linearly
with DMX value
Exponential
Light intensity can be finely
adjusted at lower DMX values and
broadly adjusted at higher DMX
values
Logarithmic
Light intensity can be broadly
adjusted at lower DMX values
and finely adjusted at higher DMX
values
S-curve
Light intensity can be finely
adjusted at lower and higher DMX
values and broadly adjusted at
medium DMX values
On
Function enabled
Off
Function disabled
LED
Light responds abruptly to changes
in DMX value
Halogen
Light behaves like a halogen
spotlight with slight brightness
changes
RAW
WW and CW with maximum value
of 255
User Calibration
Individual colour calibration.
Cross-mode brightness setting
of WW and CW with values from
0 – 255
19
Publicité
