Publicité
CONFIGURING DMX MODE (DMX Mode)
Press MODE to access the main menu (--- Menu ---). Using UP and DOWN, select the menu item
DMX Mode (observe arrow) and confirm with ENTER. In the submenu, you can now select the
desired DMX mode with UP and DOWN.
Confirm your selection with ENTER. Tables with the channel assignments can be found in these
instructions under DMX CONTROL.
CONFIGURE STANDALONE MODE
Press MODE to access the main menu (--- Menu ---). Using UP and DOWN, select the menu item
Stand Alone (observe arrow) and confirm with ENTER. In the submenu you can now use UP and
DOWN to select the standalone modes Auto, Color Macro, Static, Tunable White, User Color,
Pixel and the Timer function. Confirm your selection with ENTER.
STANDALONE AUTO MODE (auto program 1-6)
The 6 different auto programs each comprise non-editable colour-change sequences. Brightness
and speed are independently adjustable. Press MODE to access the main menu (--- Menu ---).
Using UP and DOWN, select the menu item Stand Alone, confirm with ENTER, then select the
submenu item Auto and confirm again with ENTER. Now use UP and DOWN to select one of
the 6 auto programs (observe arrow) and confirm with ENTER. To adjust brightness, use UP and
DOWN to select the menu item Dim and confirm with ENTER, then use UP and DOWN to select
the desired value between 000 and 255. Confirm with ENTER. Set the run speed by selecting the
menu item Speed, confirm with ENTER, and then select the desired value between 001 and 100.
Confirm with ENTER.
15
Publicité
