Publicité
USING YOUR WASHER
8. Select
CYCLE*
COLD WASH
WHITES
H EAVY
DUTY
QUICK
ECO
WASH --
with Ox[
DRAIN
&SPIN
CLEAN WASHER withaffr_sh
Appearance
may vary.
Turn cycle knob to select your wash cycle. See "Cycle Guide"
for details on cycle features.
9. Adjust settings,
if desired*
Appearance
may vary.
The display will show the default settings for the selected
cycle. To adjust a setting, touch its name - Wash Temp, Spin,
Soil, or Extra Rinse. Adjusting settings will change the Estimated
Time Remaining. Tightly packing the load, unbalanced
loads, or
excessive suds may also cause the washer to increase the cycle
time.
10.
Select any additional
options*
Extra
Rinse
Tumb[eFresh
Cycle
Sgnat
Ho_d 3 secorlds
for Buttor_
Sounds
Appearance
may vary.
To add an option to the cycle, touch its name - Extra Rinse,
TumbleFresh, or Cycle Signal. To remove an option from
the selected cycle, touch the option again.
"[ "[. Setting
a delayed
wash
Appearance
may vary.
If you do not want to begin a cycle immediately, you may
choose the DELAY WASH option. This will delay the start
of the wash cycle by up to 12 hours.
To set a delayed wash:
1. Touch DELAY WASH + and - buttons to set the desired
delay time.
2. Touch and hold START to set the delay. The delay
countdown
has started when the START light stops blinking.
10
*Not all options and settings are available with all cycles.
See "Cycle Guide" for available options and settings.
Publicité
