Publicité
All manuals and user guides at all-guides.com
Original User Manual FUXTEC FX-RM51SA96_rev02
23. Operating instructions for the lawnmower
Use of the wheel drive (SA series)
CAUTION:
The brake lever must be pulled when starting the engine.
Release it to stop the engine.
Wheel drive shifts lever - To engage the powered forward movement of the device.
USING THE LAWNMOWER ENGINE SPEED
The manufacturer has preset the motor speed to ensure that the device delivers
maximum performance.
DRIVE CONTROL via the brake lever
- Pulling the brake lever towards the handle allows the motor to be started via the
cable pull. During mowing, the brake lever must remain permanently applied.
- The brake lever is a safety device. As soon as it is released, the motor and, thus,
also the rotating cutting unit stops.
- Never tilt the mower to the side while the brake lever is actuated. High risk of
injury due to the rotating cutting unit.
24. Maintenance and cleaning (EASY CLEAN)
IMPORTANT
- regular, careful maintenance is necessary to ensure that the
device's safety level and performance remain unchanged.
1) Keep all nuts, screws, and bolts tightened to ensure that the device is in perfect
working condition. Regular maintenance is necessary for the safety and
performance of the device
2) Never store the device with the tank still full in a building where escaping vapors
can reach a flame, spark, or heat source
45
Handle
Shift lever wheel drive
Brake lever (motor
start/stop)
Publicité
