Publicité
12. Keep the blower (air pump) and power cord away from children
and water. Place the blower (air pump) where it will not inhale dust or
leaves. Notice: The blower is not included.
13. Note: During use, the blower (air pump) should remain on and
continue to inflate. Since the product is kept inflated by a constant air
flow, air leakage from the joint is normal and necessary, so the
product will not over-expand.
Assembly Instruction
1. Unfold the product in its entirety as the picture shows.
Take out the
Roll the product
product
and expand it
06
Open the
Fully expand the
product
product
2. Place the blower (air pump) where it will not
inhale dust or leaves, and keep the blower (air
pump) and power cord away from children and
water. Note: Please make sure the power supply is
safe and reliable. During use, the blower (air
pump) should remain on and continue to inflate.
After stretching the air pipe, position the blower (air
pump) at the end of the air pipe. Wind one end of
the tube around the blower (air pump), blow out
the air after tying. The inflation tube should be
straight and not twisted. If necessary, adjust the
position of the blower (air pump). Then use ground piles to firmly fix
the blower (air pump) on the ground.
3. Please fix the product correctly, and be sure to
fix the product with ground stakes before use. In
order to prevent overturning during the game,
please push the pile firmly into the ground, and
regularly check whether the ground pile is firm.
Ground piles should be flush with the ground or
buried in the ground to reduce the risk of tripping.
Please ensure that the product is fully inflated before children enter
the playground. Using this product when inflated or excessively
deflated may cause product instability and may cause serious injury.
Since the product is kept inflated by a constant air flow, air leakage
from the joint is normal and necessary, so the product will not
over-expand.
07
Publicité
