Publicité
d Do not abuse the cord. Never use
the cord for carrying, pulling or
unplugging the power tool. Keep
cord away from heat, oil, sharp
i
entangled cords increase the risk of
electric shock.
e When operating a power tool
outdoors, use an extension cord
i
cord suitable for outdoor use reduces
the risk of electric shock.
f
If operating a power tool in a
damp location is unavoidable, use
a residual current device (RCD)
reduces the risk of electric shock.
Personal safety
a Stay alert, watch what you are
doing and use common sense when
operating a power tool. Do not use
a power tool while you are tired
i
inattention while operating power tools
may result in serious personal injury.
b Use personal protective
i
A
i
Protective equipment
such as dust mask, non-skid safety
shoes, hard hat, or hearing protection
used for appropriate conditions will
reduce personal injuries.
c Prevent unintentional starting.
E
i
position before connecting to power
source and/or battery pack, picking
i
po er tools ith your nger on the
switch or energising power tools that
have the switch on invites accidents.
d Remove any adjusting key or
wrench before turning the power
A wrench or a key left
attached to a rotating part of the
Damaged or
Use of a
Use of an RCD
i
i
A moment of
i i
-
Carrying
power tool may result in personal
injury.
e Do not overreach. Keep proper
footing and balance at all
i
This enables better control
of the power tool in unexpected
situations.
f
Dress properly. Do not wear loose
clothing or jewellery. Keep your
hair, clothing and gloves away
i
jewellery or long hair can be caught in
moving parts.
g If devices are provided for the
connection of dust extraction and
collection facilities, ensure these are
of dust collection can reduce dust-
related hazards.
h Do not let familiarity gained from
become complacent and ignore
i
action can cause severe injury within a
fraction of a second.
Power tool use and care
a Do not force the power tool. Use
the correct power tool for your
i
i
The correct power tool
will do the job better and safer at the
rate for which it was designed.
b Do not use the power tool if the
switch does not turn it on and
Any power tool that cannot be
controlled with the switch is dangerous
and must be repaired.
c Disconnect the plug from the power
source and/or the battery pack from
the power tool before making any
adjustments, changing accessories,
i
preventive safety measures reduce
the risk of starting the power tool
accidentally.
Loose clothes,
Use
i
A careless
Such
GB/IE
35
Publicité
