PLEASE NOTE! Drawings in this manual are for illustration purposes only and in some details
may differ from the actual product.
Usage Safety
ATTENTION! Read all safety warnings and all instructions. Failure to follow the warnings and
instructions may result in an electric shock, fire and/ or serious injury or even death.
The terms "device" or "product" are used in the warnings and instructions to refer to:
SUBMERSIBLE PUMP
Electrical safety
a) The plug must fit the socket. Do not modify the plug in any way. Using original plugs and matching sockets
reduces the risk of electric shock.
b) Avoid touching earthed elements such as pipes, heaters, boilers and refrigerators. There is an increased risk
of electric shock if the earthed device is exposed to rain, comes into direct contact with a wet surface or
is operating in a damp environment. Water getting into the device increases the risk of damage to the
device and of electric shock.
c)
Do not touch the device with wet or damp hands.
d) Use the cable only for its designated use. Never use it to carry the device or to pull the plug out of a socket.
Keep the cable away from heat sources, oil, sharp edges or moving parts. Damaged or tangled cables
increase the risk of electric shock.
e) If working with the device outdoors, make sure to use an extension cord suitable for outdoor use. Using an
extension cord suitable for outdoor use reduces the risk of electric shock.
f)
Do not use the device if the power cord is damaged or shows obvious signs of wear. A damaged power
cord should be replaced by a qualified electrician or the manufacturer's service centre.
Safety in the workplace
a) Make sure the workplace is clean and well lit. A messy or poorly lit workplace may lead to accidents. Try
to think ahead, observe what is going on and use common sense when working with the device.
b) Do not use the device in a potentially explosive environment, for example in the presence of flammable
liquids, gases or dust. The device generates sparks which may ignite dust or fumes.
c)
If you discover damage or irregular operation, immediately switch the device off and report it to a
supervisor without delay.
d) If you are unsure about whether the product is operating correctly or if you find damage, please contact
the manufacturer's service centre.
e) Only the manufacturer's service centre may make repairs to the product. Do not attempt to make repairs
yourself!
f)
In case of fire, use a powder or carbon dioxide (CO2) fire extinguisher (one intended for use on live electrical
devices) to put it out.
g) Children or unauthorised persons are forbidden to enter a work station. (A distraction may result in loss of
EN