Publicité
Whitest
Whites
This cycle introduces liquid chlorine bleach to the load at
the proper time for improved whitening of heavily soiled
white fabrics. The default option for this cycle is 2nd
Rinse.
Heavy
Duty
This cycle is for heavily soiled or sturdy items. Stain Treat
is the default option for this cycle: but it can be turned off.
See "Changing Cycles, Modifiers and Options" in the Use
and Care Guide.
Normal
This cycle may be used for normally soiled cottons and
linens, such as sheets, blankets and towels.
Casual/W|'inkle
Free
This cycle can be used to wash loads of no-iron fabrics
such as sport shirts, blouses, casual business clothes,
permanent press and blends.
Darks/Colors
This cycle may be used for dark or highly dyed natural
fabrics such as jeans or other cotton items that may be
susceptible to dye loss.
Delicate
This cycle can be used to wash lightly soiled garments
indicating "Machine Washable Silks" or "Gentle" cycle on
the care label.
UIt|'a
Handwash
This cycle may be used to clean special care garments or
those labeled as "Machine Washable Wool." (Check label
instructions to make sure that the garment is washable.)
J
Auto
Soak
Use this option for set-in stains and soils that need
extra time for removal.
Auto Soak saturates the load with water and detergent,
then pauses to allow the detergent to work on soils.
2rid Rinse
An extra rinse can be used to aid in the removal of
detergent or bleach residue from garments. This
option provides an additional rinse with the same
water temperature as the first rinse.
Stain
Treat
This option provides enhanced cleaning action for
tough stains, virtually eliminating the need to pretreat
them. Stain Treat should be started on a dry load only.
Delay
Start
You can use the Delay Start feature to delay the start
of a wash cycle for up to 9 hours (depending on your
model). The Start time will increase by 1-hour steps.
Once you have set the desired delay time, you must
press START. The delay time will then show in the
display.
Power
This button turns the washer on or off.
/-
°_ %;
Soil
Level
..... '
_
Soil Level is preset for each cycle. As you press
!i ,o iJ
the Soil Level pad, the cycle time (minutes) will
_,_
increase or decrease in the Estimated Time
Y
Remaining display.
Wate_
Level
Select a water level based on the load size you are
washing. Auto Level senses the load size and adds
the proper amount of water for that load. Auto is the
default Water Level setting for each cycle, but it can
be changed.
Wash/Rinse
Temp
Select a water temperature based on the type of load
you are washing. Use the warmest wash water safe
for fabrics.
./
Start
This button starts your washer after a cycle has
been selected. All Modifiers and Options should be
selected before starting the cycle. The lid must
be closed for the washer to start.
Stop
Pushing this button once will pause the wash cycle
and unlock the lid, allowing you to add a garment.
Pushing this button twice will stop the cycle and turn
off the washer.
® Registered Trademark
/ T_Trademark
/ s_ Service Mark of
3/06
_2_A
Sears Brands, LLC used under licensee by Sears Canada Inc.
Printed in U.S.A.
Publicité
