Publicité
0.9 CU. FT. COMMERCIAL MICROWAVE OVEN
1. Press the Program button
2. Next press the 6 button
3. Next Press the Power and select the desired power setting
4. Next enter on the keypad the time you want the microwave to cook (e.g. 1 minute, 30
seconds)
5. Next press the Program button to enter the 2nd stage of cooking
6. Next press the Power button to select the desired power setting
7. Next enter on the keypad the time you want the microwave to cook (e.g. 1 minute)
8. Next press the Program button to enter the 3rd stage of cooking
9. Next select the Power and select the desired power setting
10. Next enter on the keypad the time you want the microwave to cook (e.g. 30 seconds)
11. Next press the START Button
7. X2 FUNCTION
There is a total of 20 programmable buttons with fixed time and power setting. The X2
button allows you to access programmed buttons 10 -19 (Note: You will need to program
buttons 10 -19 – refer to section 5, Memory Cooking/changing Default 0-9 Settings
To select a pre-programmed 10 -19 button. Select the keypad number 1-0, followed by
pressing the X2 button which increase by 10 and then press start. For example, if you want
to use pre-programmed button 14, first select number 4 on the keypad, followed by pressing
X2 and then press the Start Button. Programmed button 14 will be operating.
8. STOP
Press the STOP button to cancel the settings and return to standby state. In the pause state,
can press "STOP" button to cancel the function and return to standby state.
9. START
After setting the cooking time, press the "START" button to start microwave oven
immediately. Note: In standby mode, press this button to start the microwave. Each time
you press this button, it will increase 30 seconds. During cooking, the cooking power cannot
be changed, but the duration can be changed by pressing this button, which increases by 30
seconds each time. (Except for memory menu)
10. CHILD LOCK FUNCTION
Use this feature to lock the control panel when you are cleaning or to prevent young children
from using the commercial microwave oven unsupervised. In Child Lock mode, all the
buttons are rendered inoperable.
1. To Set Child Lock: Hold the STOP button about 3 seconds.
2. To Cancel Child Lock: Hold the STOP button for about 3 seconds or open the
microwave oven door.
11. INFRARED SENSOR DETECTION
When the user presses the "START" button to start, if there is no food in the cavity, the
infrared sensor will detect the cavity, then "Err" will be displayed and an error tone will be
given. When there is no food in the cavity that displays the "Err" prompt, press the "STOP"
button to cancel the error prompt or add food to restart cooking.
12. END
When the cooking time is completed, "END" will be displayed on the control panel. A beep
sound at the end will notify you of completion of the operation. The microwave will now
return to standby mode.
-12-
Publicité
