Publicité
CAUTION
a. The max time which can be set is 99 minutes and 99 seconds.
b. Never use a grill rack during microwave cooking.
c. Never operate the oven empty.
d. At the maximum microwave power, the oven will automatically lower the power after a
certain time of cooking to lengthen the service life.
e. If you open the microwave oven during operation, press the Start button once and the
preset cooking procedure will continue.
f. If you intend to remove the food before the preset time, you must press Stop button once to
clear the preset procedure to avoid unintended operation of next time use.
4. DEFROST
AT P30 (MEDIUM LOW) POWER
Press the "DEFROST" button to directly set the medium low microwave power, P30, which is
suitable for defrosting food. Press the "DEFROST" button to display P30. After selecting the
microwave power, press the 0-9 number buttons to enter the time. After selecting the
defrosting time, the maximum time that can be entered is 99:99, press the "START" button start
begin microwave cooking. A beep sound at the end will notify you of completion of the operation.
For example, to set the unit at Defrost Setting for 2 minutes, 30 seconds, Press the Defrost Button
followed by entering 2:30 on the keypad. Press Start.
AT P50 (MEDIUM) POWER
Press the POWER and set to medium microwave power, P50. Press the button to display P50.
After selecting the microwave power, press the 0-9 number buttons to enter the time. After
selecting the defrosting time, the maximum time that can be entered is 99:99, Press the "START"
button start microwave cooking. A beep sound at the end will notify you of completion of the
operation. For example, to set the unit to Medium Power and 2:30, press the POWER button and
set to P50, followed by entering 2:30 on the keypad. Press Start.
5. MEMORY COOKING /CHANGING DEFAULT 0-9 SETTING
For your convenience, the 1 to 0 Buttons on the Keypad have been pre-programmed to set times.
(Refer to Preset Buttons section of this manual)
To change these settings:
1. In Standby Mode
2. Press the Program Button
3. Next, press the number on the keypad you want to program.
4. Next, press the POWER button and select the POWER LEVEL desired. Next, enter the time to be
set
5. Next, press the START button. The program has now been set.
An example of how to program/customize the program setting is outlined below. Let's
assume that you want to set keypad button #3 to 1:20 seconds at High power.
a. Press the PROGRAM button on the keypad
b. Next press Number 3 on the keypad. (Note: Press X2 button after pressing number 3 to set
keypad button #13)
c. Next, press the Power button on the keypad Next, enter 1:20 on the keypad.
d. Next, press the START button on the keypad. The program has now been set.
6. MULTI-STAGE COOKING
Multi-stage cooking allows the user the ability to cook/bake food the way it may need to be
cooked. It allows you to control the amount of time and power level at different times for
example cooking something on medium heat for 2 minutes, followed by high heat for 1 minute.
To set Multi-stage cooking you need to enter each stage of cooking (time and power).An example
of 3 stage cooking is shown below which is first 1 minute, 30 seconds at the heat setting set,
followed by 1 minute at the heat setting set, followed by 30 seconds at the heat setting set:
PMWC1000-25
-11-
Publicité
