Publicité
Use the reference number found under
Data".
Assembly
WARNING:
• When assembling or inserting the extraction filter
as well as the carbon filter, the appliance must not
be connected to the mains.
• Failure to use the mounting fixtures may lead to a
risk of electric shock.
CAUTION:
• Before mounting, check that the wall has enough
load capacity to bear the cooker hood.
• When drilling the holes in the wall always make
sure that no existing electrical cables or other ob-
jects are damaged.
• Make sure that the ventilation slots are clear of
obstacles and are not covered.
NOTE: Recommendations for preparation work
• When installing, ask another person to assist.
• Wear protective gloves to prevent injuries from
any sharp edges.
Fig. 2
Fig. 5
"Technical
Fig. 3
Fig. 6
Drilling dimensions
Fig. 1
A Shaft closure bracket
B Shaft middle bracket
Fig. 7
42
unit mm
C Suspension housing
D Securing housing
Fig. 4
Publicité
