Publicité
4. WAY OF FUNCTIONING
The cooling display keeps food at a constant temperature of 2°C pre-adjusted in the
factory.
Press on the switch (n°1 on picture), the machine is on, the electronic thermostat
(n°2 on picture) is on. Press the digital switch (n°3 on picture) to turn on light.
2
1
2
3
5. FUNCTIONING / MANIPULATION
a) Installation / Assembly:
- Place the equipment on a stable and horizontal surface.
- Position the accessories
- A distance of 10 cm from the partition or the wall is considered enough.
- Never place the device near a wall or near a partition made of combustible
materials even if it is very well isolated.
- Caution: the display cooling must not be exposed at the sun.
b) First starting:
First cleaning
Clean the device before the first use. (See 6 Cleaning)
Connection of the device
- Make sure that the voltage and frequency of the electrical system comply with
the values indicated on the nameplate.
- Always check that the electric power supply cable or plug are free of damage.
- Make sure that every control knob is positioned on 0.
- Connect the electric power supply cable to a socket with a protection wire.
Switch ON/OFF
Electronic thermostat
Switch LED
1
3
14
Publicité
