Publicité
MODEL: PXL31
Such precautionary measures reduce the risk
of injury to persons.
L O A D I NG
T OOL
Do not load the tool with fasteners
●
when any one of the operating controls
is activated.
Never place a hand or any part of body
●
in fastener discharge area of tool.
Never point the tool at anyone.
●
Do not pull the trigger or depress the
●
w o r k p i e c e
c o n t a c t
a s
a c c i d e n t a l
actuation may occur, possibly causing
injury.
!
WARNING:
T h e
w a r n i n g s
a n d
p r e c a u t i o n s
discussed above cannot cover all
possible conditions and situations that
may occur. It must be understood by
the user that common sense and
caution are factors which cannot be
built into this product, but must be
supplied by the user.
UNPACKING
This tool has been shipped completely
●
assembled.
Carefully
remove
the
tool
and
●
accessories from the box.
Inspect the tool carefully to make sure
●
no breakage or damage occurred during
shipping.
Do not discard the packing material until
●
you
have
carefully
inspected
satisfactorily operated the tool.
If any parts are damaged or missing,
please call 1-888-669-5672.
!
WARNING:
If any parts are missing do not operate
this tool until the missing parts are
replaced. Failure to do so could result
in possible serious personal injury.
!
WARNING:
Do not attempt to modify this tool or
create accessories not recommended
for use with this tool. Any such
alteration or modification is misuse
a n d
c ou l d
r e s u l t
i n
h a z a r dou s
condition leading to possible serious
personal injury.
06
HTTP://WWW.FREEMANTOOLS.COM
FEATURES
S P E C I F I C AT I O N S
AIR CONSUMPTION: 3.7 SCFM with
100 fasteners per minute @ 90 psi
AIR INLET: 1/4 inch NPT
MAGAZINE CAPACITY:
16Ga. Finish nail: 80pcs
18Ga. Brad nail: 100pcs
18Ga. Staple: 100pcs
WEIGHT: 3.52 lbs
MAXIMUM PRESSURE: 110 psi
PRESSURE RANGE: 60 psi – 110 psi
FASTENER LENGTH RANGE:
16Ga. Finish nail: 3/4"- 2"
18Ga. Brad nail: 5/8" - 2"
18Ga. Staple: 5/8" - 1-5/8"
0.118"(3mm)
0.079"(2mm)
1/4"(5.7mm)
5/8"
15mm
3/4"
20mm
3/4"
20mm
1"
25mm
1"
25mm
1-3/16"
30mm
1-1/4"
32mm
5/8"
1-3/8"
35mm
1-1/4"
32mm
3/4"
1-3/8"
35mm
1"
1-1/2"
38mm
1-5/8"
40mm
1-5/8"
40mm
1-1/4"
any
1-3/4"
45mm
1-3/4"
45mm
1-1/2"
2"
50mm
2"
50mm
1-5/8"
1.6 x 1.4mm
1.26 x 1.05mm
1.26 x 1.05mm
(0.063" x 0.055")
(0.050" x 0.041")
(0.050" x 0.041")
16Ga.
18Ga.
and
Compatible with all generic 18 gauge brad
nails / staples and 16 gauge straight finish
nails.
F E AT U R E S
3 6 0 °A D J U STA B L E E X H A U ST
●
Allows user to direct air away from face.
ANODIZED ALUMINUM MAGAZINE
●
For long lasting durability.
COMFORT-GRIP HANDLE
●
For
increased
comfort and control.
ERGONOMICALLY ENGINEERED BODY
●
Rugged and Comfortable resulting in a
light-weight tool
great for extended
use.
ADJUSTABLE DEPTH
●
Depth is easily adjustable for various
applications.
1-888-669-5672
MODEL: PXL31
NO-MAR SAFETY CONTACT
●
Eliminate damage to working surface.
OPERATION
U SI N G B E LT HOOK
The tool is packed with a separate hook
system. Assemble the hook on the tool before
using the hook. The hook can be positioned on
either left or right sides.
1.
Loosen and remove the hook screw and
nut(A). Save the screw and nut for future
use.
2.
Position the hook in your preferred position.
Using the longer screw packed with hook,
fasten hook to tool.
16mm
19mm
25mm
32mm
38mm
40mm
18Ga.
ADJUSTING THE EXHAUST
The adjustable exhaust on the cap of the tool
allows users to direct the exhaust according to
operator preference. To adjust the direction,
turn the exhaust cap in the desired direction.
L O A D I NG F A ST E N E R S
1.
Connect the tool to the air source.
2.
Push down on the latch button (C) Pull back
on the magazine cover (D).
Hook nut(A)
Insert a stick of fasteners into the magazine
3.
rail (E). Make sure the pointed ends of the
fasteners are resting on the bottom ledge of
the magazine when loading. Make sure the
fasteners are not dirty or damaged.
Push the magazine cover (D) forward until
4.
latch button pops up.
Hook
Magazine rail
HTTP://WWW.FREEMANTOOLS.COM
1-888-669-5672
Latch button(C)
(D)
Magazine cover
(E)
07
Publicité
