Publicité
MAINTENANCE &
CHARGING
The following maintenance instructions are important to keep your
device functioning as intended. Failure to follow them may cause your
device to stop working.
Maintenance and Cleaning
The JOLT™ Thermo Pad is NOT waterproof or machine washable. Do not
let any liquid enter the device or the ventilation openings.
Make sure the device is turned off before cleaning.
To clean the belt, wipe the inner surface of the strap with a damp
microfiber cloth. Completely wipe the device, frame, and straps.
Charging
Plug one end of the USB-C charging cable into the USB-C port and the
other end into the USB-A adapter of your choice to charge the JOLT™
Thermo Pad. Check the battery status of the device using the battery
level LED indicator (on the right side of the USB-C port).
low
battery
The battery level LED indicator blinks when the device is properly
connected until fully charged. The LED indicator turns green when the
device is 100% charged. Battery life is approximately 120 minutes for
cold and hot modes, and 60 minutes for contrast mode.
battery
50% charged
battery
100% charged
29
Publicité
