Publicité
Moving parts
3．Avoid hitting the bed and scratching the coating on the bed with sharp objects.
4．Please avoid inhaling moisture into the bed and mattress, which will cause rust, abnormal noise
and bacteria breeding. If water adheres, wipe it off immediately.
5．When the bed frame ages and it reaches a certain servicing time, the metal part of the bed body
and the plastic parts of the headboard or foot board, guardrail can be recycle.
6. Mattress-cleaning and maintenance
1．When using it, avoid scratching the fabric with sharp-angled tools or knives, cover it with sheets
or cleaning pads, and clean it frequently to protect it from dryness.
2．Clean the mattress regularly with a vacuum cleaner, Mattress cover can be washed in 100℃.
3．Expose the mattress often to keep the sleep fresh and comfortable, but be careful not to expose
the mattress to too long.
4．If the fabric is accidentally stained, please refer to the corresponding recommended cleaning
methods in the instructions; do not use corrosive chemicals to clean the fabric.
5．If accidentally the chewing gum or other jellies get on the fabric, do not wipe it forcibly. Use an
ice pack to allow it harden and gently peel it off.
6．If the thread is found to be loose due to wear and tear, do not pull it off by hand, use scissors to
cut it together.
* If your order does not have a mattress, please refer to the contract configuration.
7. Caster-detection and maintenance
1．Regularly check the casters to avoid hitting or overloading, which will cause damage to the
casters.
2．Grease the casters or wheels on a regularly, and the frequency of addition should be determined
according to the specific actual use conditions. In general, lubricating grease is added every six
months.
- 15 -
Publicité
