Publicité
Les langues disponibles
Les langues disponibles
Unable to adjust guardrail
Casters cannot turn
Unable to install
headboard and footboard
5. Bed-maintenance
1．In order to use the bed safely, safety inspections must be done regularly. Conduct a
comprehensive inspection every six months, to ensure that there is no looseness in the connection
parts and the function of up & down for the bed can be operated normally.
2．At the joints of the frequently moving parts of the bed, an appropriate amount of lubricating oil
needs to be added during daily inspection; if serious damage is found, it should be replaced
immediately to ensure safety, add lubricated parts as show. Add some lubrication oil at the moving
parts as show in the figure.
Control element failure
There are foreign objects under the
backboard or in the drive unit
The rotating shaft is stuck by strips of
dirt
Internal mechanism failure of casters
Wrong installation method of
headboard or footboard
Mechanical failure
Notify maintenance
Remove foreign objects
Clean the rotating mechanism
Replace casters, refer to 3.1 Casters
Disassembly and Replacement
Check the locking mechanism
Place the headboard and footboard
correctly, refer to 1.2 Head board &
Foot board assembly method
Notify maintenance
- 14 -
Publicité
