Publicité
3.2 Guardrail disassembly and replacement
Use 2pcs 14-inch wrenches
to loosen the nut, remove the nut, spring washer, flat
washer, and bolt in turn, and then remove the guardrail. (The picture is for reference only, the actual
product shall prevail)
3.3 Motor disassembly and replacement
Use 2pcs 17-inch Allen wrenches
to unscrew the motor, take out the bolt, and replace the
motor. When the replacement is completed, install the bolts in the order shown in the figure, and
use the wrench to tighten the knot.
- 12 -
Publicité
