Publicité
evolve, it will veer to grey/green tones and little cracks may appear. These changes are normal and do no
t affect the resistance or durability of the furniture.
To keep the original shade you have to treat acacia with protective oil once to twice a year. Clean furnitur
e with a hard brush and hot soapy water or a jet keeping the recommended distance before any treatment.
Do not use high pressure jet. First of all sand the table with coarse grain sandpaper then fine grain sandpa
per to obtain an even surface condition. Apply the oil by carefully respecting the oil manufacturer's instructi
ons. Leave to dry, remove the excess oil with a cloth. Apply a second coat if the oil manufacturer recomme
nds it.
Protection of the screws and bolts
Steel is a material that exposed to external elements (humidity, salty winds) will naturally oxidise. To preve
nt the appearance of rust, our steel furniture is delivered original with an Epoxy treatment. However this lay
er gradually disappears under the effect of external elements and must be renewed regularly. For this, app
ly an anti-rust aerosol at least once at the beginning and end of the season (available in hardware shops or
DIY shops). Increase the treatment frequency every 3 months for furniture exposed to salty sea winds.
The screws and bolts must also be the subject of such a treatment.
If the rust appears despite all that, it can easily be treated and removed with the usual products such as wh
ite vinegar or citric acid. A cloth soaked with car polish can also allow you to remove the rust spots. Finish
with an anti-rust spray to protect the furniture, to apply regularly.
Publicité
