Publicité
5. FAQ
Q1: Screen unable to display?
A1: Check battery, and make sure the placement method is
correct.
Q2: The water valve does not output water?
A2: 1. Check if the program is set up correctly.
2. Check if the battery is low.
3. Check if the faucets are turned on.
4. Check if the rain delay is turned off.
Q3: The connection point on the pipe is leaking?
A3: 1. Check if the threads of the faucet and water pipe is the
same.
2. Check if there is any damage on the connection point.
3. Check if the gasket is missing or if it is installed tightly on the
faucet or the pipe.
4. Use sealing tape if necessary.
Q4: Is it compatible with rain bucket or drip irrigation system?
A4: No, because water pressure for water bucket or drip irrigation
system is different than the press standard for water timer,
leading to 0 output water on the water valve.
5
Publicité
