5
AUTO
To start running preset automatic watering
program.
NOTE: If any two of the programs overlaps,
the subsequent program B will only start
when prior program A finishes, and the
start time of program B will postpone to
the end time of program A, but duration of
program B will be the same.
6
OFF
To stop auto watering program.
7
MANUAL
Under Auto program, press and hold "OK"
to start manual watering, press "ZONE" to
switch Manual watering zones, press "OK"
to enter manual watering time setting, then
leave it for 5s without operation or press
"OK" to start function, press and hold "OK"
again or dial to any position to turn off
manual watering. (Set up range: 0min-6h)
NOTE: When manual watering function is
running, the auto program that overlaps
will be paused.
8
RAIN DELAY
Under Auto program, press and hold "+" to
start rain delay, select duration then press
"OK" to confirm, leave it for 5s or press
"ok" to run the function, press and hold
"OK" again to cancel rain delay. (setup
range: 0h、24h、48h、72h)
NOTE: When rain delay runs, all button
and dial will not work.
4